瑞晨建材
电话:0571-56017206
电话0571-88755169

博悦平台手机登录

博悦平台手机登录电话:0571-56017206

博悦平台手机登录传真:0571-85853340

博悦平台手机登录地址:杭州市余杭区余杭镇义桥工业园区

当前位置:博悦平台手机登录 > 博悦平台手机登录 > 行业资讯行业资讯

落水管配件具介绍
文章来源:wujian06.com  作者:瑞晨建材  更新时间:2020-01-03 19:23:44  Tag:  浏览:1

 落水管配件具体有哪些

第一、直接
    又称为套管、管套接头。使用时要注意与水管的尺寸相匹配,当管道不够长时,可以作为连接两根管道的配件来延伸管子。
第二、弯头
是用于转弯水管的,由于水管本身是笔直的,不能弯折,若要改变水管的走向,只能通过弯头来实现,主要有45°弯头和90°弯头。
第三、内丝和外丝
是连接龙头、水表以及其它类型水管时会用到的,通常是配套使用的,家装中主要会用到的都是内丝件。
第四、三通
分为同径三通和异径三通,是连接三个不同方向的水管用的,从一根水管中引出一条水路来的时候需要使用到。
第五、大小头
是连接管径不同的两根管材使用的,直接、弯头和三通都有大小头之分。
第六、堵头
是水管安装好后,用来暂时封闭出水口而用的,在安装龙头的时候会取下,在使用堵头时要注意大小要和对应的管件所匹配。
第七、绕曲弯
也叫过桥,当两根水管在同一平面相交而不对接时,为了保证水管的正常使用,我们用绕曲弯过渡,就像拱桥一样,通过平面的避让来避过水管的直接相交。
第八、截至阀
作用是启闭水流;管卡的作用是固定水管位置,防止水管移位。
第九、S弯和P弯
一般用于水斗和下水管链接,都具有防臭的功能,S弯一般用于错位链接,而P弯则属于除臭链接。其作用是防堵、防臭。
Which of the first downcomer fittings, direct, also known as casing, casing joints. When using, pay attention to match the size of the water pipe. When the pipe is not long enough, it can be used as an accessory to connect two pipes to extend the pipe. Second, elbow is used to turn the water pipe, because the water pipe itself is straight, can not bend, to change the direction of the water pipe, only through the elbow to achieve, mainly 45 elbow and 90 elbow. Third, the inner and outer silk is connected to the TAP, water meter and other types of water pipe will be used, usually supporting the use of home decoration, the main will be used in the inner silk pieces. The fourth, tee is divided into the same path tee and the different path tee, is connected to the three different directions of the water pipe, from a water pipe out of a waterway to need to use. Fifth, the size of the head is connected to the diameter of the two pipe materials used, direct, elbow and tee have the size of the head. Sixth, the plug is installed after the water pipe, used to temporarily seal the outlet for use, in the installation of the Faucet will be taken down, in the use of the plug to pay attention to the size and the corresponding pipe fitting match. Seventh, winding is also called bridge, when two water pipes in the same plane intersection but not docking, in order to ensure the normal use of water pipes, we use winding transition, like arch bridge, through the plane to avoid the direct intersection of water pipes. The function of the cut-off valve is to open and close the flow of water; the function of the pipe clamp is to fix the position of the water pipe and prevent the water pipe from shifting. The 9th, s bend and P Bend are commonly used for bucket and sewer connections, both of which have deodorization function, s bend is commonly used for dislocated connections, and p Bend is a deodorization link. Its role is anti-blocking, anti-odor.
上一篇:没有了      下一篇:落水管布置工艺的介绍
新濠天地注册游戏 新濠天地网上娱乐网站 万象城官方网站 无限平台 泰格娱乐官网